LCF Technics Product User Guide
Fault Codes
If there is a fault, the display will show an error code – see below.
ERR-02 Motor hall fault or motor short circuit
ERR-03 Controller failure
ERR-04 Throttle failure
ERR-08 Low battery alarm
ERR-06 Turn on the motor with cyclist’s feet on the pedal for coaster brake version
Troubleshooting:
LCF Technics Limited | The Old Library, Remount Farm, Lusk, Co Dublin, Ireland, K45 XP26 | https://lcftechnics.eu/
Phone: +353 (0) 85 261 6555 | Email: service@lcftechnics.eu | Copyright © 2021 LCF Technics
Page 16
Problem Checks
Display will not power on. Check battery cable connections and battery charge level.
Motor assist power is weak or intermittent. Restart VLCD5 unit – avoid touching pedals during initialisation.
Motor assist drops off in use – display remains on. Check magnetic pickup and spoke magnet positions. Verify alignment and distance between them.
VLCD5 is not displaying speed. Check magnetic pickup and spoke magnet positions.
Speed display shows incorrect speed reading. Verify correct wheel size is selected in settings – it should be the wheel size of the 'spoke magnet' wheel.
VLCD5 display and motor assist turns off in use. Check for intermittent battery cable connections to motor and full engagement of display connectors.
To Next Page
Loading...