SP 600 PROFESSIONAL POWER AMPLIFIER USER MANUAL PAGE
19/9 V-1
Stereo 2Ω 850W x 2
Bridge 8Ω 1000W
Bridge 4Ω * 1400W
Parallel 8Ω 270W x 2
Parallel 4Ω 520W x 2
THD+N≤0.1%
Parallel2Ω * 700W x 2
Frequency Response
20Hz~20KHz±0.5dB
Input Sensitivity
0.775V
S/N ratio (A Weighted RMS)
>100dB
Crosstalk at rated power output (8Ω1KHz)
>85dB
Damping Factor (f=1kHz 8Ω)
>200
Protection
Soft start up, Thermal cut off、Short Circuit、Overloaded、
DC fault、Voltage limiter, AC line fuse
Indicators
Power、Signal、Protect、Limit、Stereo、Bridge、Parallel
Connectors
INPUT: NEUTRIK COMBO x 2; XLR Link male x 2; OUTPUT:
NEUTRIK Speakon x 3
Cooling system
Low noise, variable speed fans
Power supply
230V ~ 50Hz
Dimension（
（（
（W×D×H)/Weight
483 x 499 x 44 mm
* Important note: We do not recommend a 2 Ohms stereo or a 4 Ohms bridge mode operation under
full load conditions!
Warranty
Adam Hall warrants its products to be free of all detectable flaws in material and workmanship for a period of
24 (twenty-four) months from the date of sale. Any and all damage caused by misuse or improper use shall
be excluded from warranty. Tampering by outside parties or unauthorized modifications shall render any and
all warranties null and void.
SP Series
Professional Power Amplifier
Specification is subject to change without prior notice.
To Next Page
Loading...
