Need help?Do you have a question about the LDG AT-11MP and is the answer not in the manual?
Details the AT-11MP's configuration, tuning range, and meter functions.
Explains how to power the unit on, use standby mode, and the associated LED indicators.
Describes how Auto and Semi modes initiate the tuning process and required RF power.
Details the use of Capacitor and Inductor Up/Down switches for fine-tuning.
Explains the audio indication of SWR levels through a series of beeps.
Covers SO-239s, DC power jack, and the radio interface for compatible radios.
Advises on tuning in Semi mode and the need to reduce power when necessary.
Discusses actual tuning results with various antennas like dipoles and beams.
Explains tuner compatibility with mobile whips and random wires, including balun use.
Details the usable bandwidth and signal loss characteristics across frequencies.
Addresses issues with RF getting into the tuner and processor lock-up.
Outlines procedures for remote support, warranty, and non-warranty repairs.
Provides details on available future upgrades and their associated costs.
Encourages users to share their experiences and provide photographs of the tuner in use.
To Next Page
General
