Need help?Do you have a question about the LDG AT-100Pro and is the answer not in the manual?
Quick start instructions for first-time users before transmitting.
Critical warnings on power limits and antenna installation safety.
Details the function of each button and LED meter on the front panel.
Identifies and describes the rear panel connectors of the AT-100Pro.
Guides on connecting RF input/output and DC power.
Emphasizes proper grounding and lightning arrestor use for safety.
Explains basic functions and special startup commands for the tuner.
Details how to access and change various user-selectable settings.
Explains Peak/Average modes, wattmeter scales, and auto/semi tuning.
Covers Hi-Z/Lo-Z settings and how to select between two antennas.
Describes automatic, semi-automatic, and full tuning cycle operations.
How to use memory tuning, bypass the tuner, and interpret the LED meters.
Details manual tuning adjustments and how to query tuner settings.
Guidance on installing and using the tuner in a mobile environment.
Advice on when to use Auto mode versus other tuning methods.
Explains Peak mode, turning off LEDs, and common error indications.
Basic concepts of impedance, resistance, capacitance, and inductance.
How impedance affects transmitters, transmission lines, and antennas.
Details the internal components and switching network of the AT-100Pro.
Advice on minimizing interference during tuning operations.
Guidelines for cleaning, protecting, and getting technical assistance.
Information on product warranty coverage and repair procedures.
Details on how firmware updates are released and installed.
Encouragement for users to provide ideas and share product usage.
To Next Page
General
