Need help?Do you have a question about the LDG AT-600Pro and is the answer not in the manual?
Quick start guide for initial setup and operation.
Discusses power handling capabilities and limitations.
Critical safety advice regarding power lines and installation.
Describes the buttons, LED bargraph scales, and indicator LEDs.
Details the connectors and jacks on the rear of the unit.
Instructions for connecting the tuner to the transceiver and antenna.
Recommendations for grounding and lightning arrestors.
Explains how to use the front panel buttons for operation.
Details how to access and configure user-settable options.
How to toggle between average and peak power display modes.
How to select between 60W and 600W scales for the power meter.
Explanation of fully automatic vs. semi-automatic tuning modes.
How to set the SWR threshold for automatic tuning.
How to switch between the two antenna ports.
How the AT-600Pro operates during transmit and receive.
Overview of how tuning cycles are initiated.
Procedure to initiate a memory tuning cycle.
Procedure to explicitly initiate a full tuning cycle.
How to place the tuner in bypass mode.
Explains the different error codes and their meanings.
Visual representation of various error codes.
How to manually adjust inductance and capacitance values.
How to manually set the high/low impedance relay.
Procedure to store manual adjustments in memory.
How to check the status of user settings.
Guidance for using the tuner in a mobile environment.
Information about RF noise generated by the microprocessor.
Details on tuning coverage outside ham bands.
Explains fundamental concepts of impedance in RF circuits.
Explains impedance matching in RF systems.
How SWR is measured and its significance.
The role and limitations of antenna tuners.
Details the tuner's design principles and tuning algorithm.
Explains how the SWR sensor and microprocessor work.
Summary of button primary and secondary functions.
Advice on proper tuning procedures to avoid interference.
Information on how to get customer support.
Details of the product warranty.
Information on service after the warranty period.
How to provide feedback on the product.
To Next Page
General
