Need help?Do you have a question about the LDG Z-100 and is the answer not in the manual?
General| Frequency Coverage | 1.8 to 54 MHz |
|---|---|
| Memories | 2000 memories |
| Latching Relays | Yes |
| Connectors | SO-239 |
| Tuning Speed | Fast |
| Power Supply | External DC |
| Weight | 1.5 pounds |
| Impedance Range | 6 to 1000 ohms |
| Control Interface | None (manual operation) |
Quick start guide for immediate operation before reading the full manual.
Technical parameters and performance metrics of the Z-100.
Overview of the Z-100's design and front panel controls.
Warning about exceeding the Z-100's maximum power handling capabilities.
Explains how the Tune button controls all functions via press duration.
How to activate bypass mode by briefly pressing the Tune button.
Using memory tuning for quick resets on previously tuned frequencies.
Performing a full tuning cycle by holding the Tune button.
Interpreting the green LED to understand the SWR level.
How the tuner enters a low-power "deep sleep" state after use.
Tips for resolving common issues, including power levels and SWR problems.
Information on how to obtain technical assistance from LDG.
Details on warranty coverage and service procedures.
To Next Page
