LDG Z-817H User Manual

Z-817H OPERATIONS MANUAL MANUAL REV A
PAGE 1
LDG Z-817H 75-Watt
Automatic Tuner
for Yaesu FT-817 and
Other QRP Radios with
Amplifiers
LDG Electronics
1445 Parran Road
St. Leonard MD 20685-2903 USA
Phone: 410-586-2177
Fax: 410-586-8475
ldg@ldgelectronics.com
www.ldgelectronics.com

LDG Z-817H Specifications

General

Brand	LDG
Model	Z-817H
Category	Tuner
Language	English

Summary

Specifications

An Important Word About Power Levels

Important Safety Warning

Getting to Know Your Z-817H

Front Panel

Details the Tune button and Status/SWR LEDs on the front panel for operation feedback.

Rear Panel

Connector Ports

Details the ANT, GND, TX, PC, and RADIO connectors on the rear panel for various connections.

Installation

Battery Installation

FT-817 Installation, No Amplifier

FT-817 Installation, With Amplifier

Finishing Up FT-817 Installation

Hookup For Radios Other Than FT-817

Operation

Basic Tuning Operation, Using With The FT-817 Radio

Explains the two types of tuning cycles (memory and full) and how the Z-817H learns frequency matches.

Toggle Bypass Mode

Initiate a Memory Tune Cycle

Force a Full Tune Cycle

Using The Z-817H With Other Radios

Status LED

Operation with a PC / CAT

SWR

SWR Measurement

SWR Sensor

Tuning Routine

Care and Maintenance

Technical Support

Two-Year Transferrable Warranty

Out of Warranty Service

Returning Your Product for Service