Firmware upgrades
From time to time LDG may release upgraded firmware for the AT-100Pro, refining operation
and adding features. Your AT-100Pro is not field programmable; you will have to remove the
present chip and replace it with the upgrade chip. Upgrades are expected to cost about $10-$20,
and will be announced on our web site when available.
Feedback
If you have an idea to improve our software or hardware, please send us a description. If we
incorporate your idea in the AT-100Pro, we'll send you a free upgrade as a “thank you”.
We encourage everyone who uses the AT-100Pro to contact us (card, letter or e-mail preferred)
telling us how well it works for you. We are also always looking for photographs of our products
in use; we frequently place such pictures on our Web site (www.ldgelectronics.com).
22
To Previous Page
Loading...
