Power and Environmental Requirements
Photon II System Guide 11
Packaging for Shipment
Original Packaging
Use the original factory packaging containers to return ship the system to
LDS-Dactron for Calibration or service. If the system is being returned
to LDS-Dactron for service, attach a tag indicating the return
merchandise authorization (RMA) number provided by LDS-Dactron
customer support, type of service required, return address, system model
name, and serial number.
The following general instructions should be used for repackaging with
commercially available materials:
1. Wrap the system with heavy paper or plastic.
2. Use a strong shipping container. A double wall carton made of 350-
pound test material is adequate.
3. Use a layer of shock absorbing material 3 to 4 inches (70 to 100 mm)
thick around all sides of the system to provide firm cushioning and
prevent movement inside of the container. Protect the control panel
with cardboard.
Caution
Styrene pellets in any shape should never be used as packing
material. The pellets do not adequately cushion or prevent the
system from shifting in the carton. The pellets also create static
electricity that can damage electronic components.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
6. In any correspondence, refer to the system by model name and serial
number.
To Next Page
Loading...
Need help?
General
