System Installation
Photon II System Guide 17
5. Your Photon II system is now calibrated. You will next see
the RT Pro Photon Start-up Page
6. You are now ready to use your Photon II system. Please refer
to the RT Pro User Guide (included on a CD ROM that
arrived with your Photon II) for further instructions.
Updating the Device Driver
To update the LDS-Dactron Photon II device driver follow these
instructions.
1. Connect the Photon II to the PC with a USB cable.
2. Select Settings from the Start Menu and choose Control
Panel.
3. Double click on the System Control Panel. This will open
the System Properties window.
4. Select the Device Manager tab from System Control Panel.
You may first need to select the Hardware tab, and then
select Device Manager depending on the version of
Windows you are running.
To Next Page
Loading...
Need help?
General
