POWERdraft
The driver is installed in a separate directory. SETUP creates a program group
containing the following icons:
The two Configure icons only work when AutoCAD is not running.
3. Use these icons to configure either POWERdraft or the original driver that comes
with AutoCAD ( WHIP ) as the actual display driver for AutoCAD. After Setup
has completed successfully, POWERdraft is already configured.
When POWERdraft is configured, the POWERdraft logo will appear when AutoCAD
starts up.
" POWERdraft HELP " opens the online Help file.
" Configure POWERdraft " configures POWERdraft as the
AutoCAD display driver.
" Configure Original Driver " configures the AutoCAD original
display driver ( WHIP ).
1. From Windows desktop, click
Start > Settings > Control Panel .
2. Click the "
3. Click " POWERdraft " from the list.
4.
5. Follow the instructions from the InstallShield program to complete
uninstallation.
Add / Remove Programs " icon.
Click the " Change / Remove " button.
Uninstalling POWERdraft
Leadtek Quadro Series General Guide 31
To Next Page
Loading...