Lens Calibration Guide
4
Creating a Lens Calibration in the studio.
Setting up to take the Calibration Shot
What you will need: a Leaf diffuser or any white diffusing sheet that will fully
cover the lenses to be used.
1. Connect the camera back to the Leaf Capture software.
2. Place the camera in front of a uniform light source.
Tip: A studio flash with a soft box is recommended.
With this setup, you can now create the lens calibration file using Leaf Capture’s
calibration wizard.
Creating and Loading the Lens Calibration File
Create files wizard
1. In the Camera menu, select Lens Calibration>Create Files Wizard.
2. Follow the steps in the lens calibration wizard.
To Next Page
Loading...
Need help?
General
