Leakomatic M4i - CONTROL UNIT OPERATION; Operating Modes Overview; Mode Indicator Functions

6
4. Fill in the user information and the PIN code.
5. You will receive an email that contains the verification link. Click the link to
activate your new Cloud account.
Note! If you do not receive a confirmation email, check your spam folder
6. You can now log into the cloud service with your new account. Remember to
keep your passwords in a safe place.
If you already have a Leakomatic Cloud account, you can add multiple devices on
the same account in the App or on the Internet. If the unit has been oine for more
than 24 hours, a notification is given in the App. If the unit has been oine for seven
days, an e-mail is also sent to inform you that the unit has lost contact with the
cloud service.
CONTROL UNIT
OPERATION INSTRUCTIONS
Leakomatic has three modes of operation. Press the Mode button to
select a mode. Press briefly to switch between Home and Away mode.
Keep the button pressed longer to activate the Pause mode. The selected
mode shows in the mode indicator and the on the screen.
Setting Description Indicator
Home
Allows longer flow time; use when you are at
home.
Light on
Away
Allows minimal water flow. Recommended to use
when you are away from home for longer periods
of time. For maximum protection, you can use this
mode every time the house is left unattended.
Flashes quickly
Pause
Temporarily de-activates the setting that shuts off
water and sounds an alarm. Activate this mode
when you need an infinite amount of water, i.e. for
watering the lawn.
Flashes slowly
When you activate Pause mode you can determine how long the mode stays on
before the system returns to its normal function. You can deactivate Pause mode any
time by pressing the mode button which restores the device to its previous mode of
operation.