8
Wrist Strap Attachment Instructions
Use the included Wrist Strap to avoid accidently dropping the device.
To securely attach the binoculars to the Wrist Strap:
Step 1:
Locate the thread loop on the end of the
strap. Insert it into the groove behind the bar
and then push the loop through the opening.
Step 2:
Feed the end of the strap up and
through the loop and pull it tight.
Step 3:
Make sure the loop is securely tightened
around the bar.
How to Use
1. Hold the binoculars up to your eyes using
both hands and use the Wrist Strap to
secure the device if desired.
2. While looking at a distant object , carefully
move the 2 Adjustable Binocular Barrels
to fit the width of your eyes so that your left
and right fields are correctly aligned, forming
a perfect circle.
If the interpulillary distance (IPD) has not
been properly adjusted, the image might be
uncomfortable to view.
To Next Page
Loading...