LC Easyjet-16W/18S User Manual V13GZ.1
53
following screen appears.
Notice: If it does not print, please select “untitled.tpf” and then click icon to start printing
work.
The whole procedure of Maintop application has been explained above.
5.4 Printer Calibration
This section explains how to use the calibration software.
Before run the calibration software, please confirm the network cable is well connected.
1. Send the “Alignttools-EN” to desktop, create shortcut, the following screen appears:
2. Double click “Alignttools-EN” icon “ ” , the following screen appears:
To Next Page
Loading...