Leckey BeMe - Page 119

Leckey BeMe User Manual p119
SECTION 18.37:
ADJUSTING PELVIC
CRADLE
To adjust the pelvic cradle, either change the
amount of webbing passing through the cam
buckles at the side of the seat base
, or
back of the seat
. Or, adjust the length of
the webbing on the front straps
, on either
side.
To detach the 2-point belt, reverse the
process.
Safety Information: You must
ensure when using the 2-point
belt that the webbing is fed
through the slot in the seat core (not over
the seat core). This is also recommended
when using the 4-point belt.