p90 Leckey BeMe User Manual
SECTION 17.9:
ATTACHING AND
DETACHING
SHOULDER SECTION
COVER
To attach the shoulder cover, slot the top
of the thoracic cover into the cavity on the
underside of the shoulder cover
. Align
the shoulder cover with the moulding and
wrap the cover over both ends, securing in
place with the zips
. Ensure the cut-outs at
the back of the shoulder cover align with the
harness connectors, or allow for the harness
connectors to pass through
.
To detach the shoulder cover, reverse the
process.
To Next Page
Loading...
