Leckey BeMe - Page 89

Leckey BeMe User Manual p89
SECTION 17.7:
ATTACHING AND
DETACHING SACRAL
COVER
SECTION 17.8:
ATTACHING AND
DETACHING THORACIC
BACKREST COVER
To attach the sacral cover, align the cover
with the moulding and secure in place
with the snap fasteners at the sides
, and
underneath the moulding
.
To attach the thoracic cover, slot the top
of the sacral cover into the cavity on the
underside of the thoracic cover
. Align the
thoracic cover with the moulding and secure
in place with the snap fasteners at the top and
bottom
.
To detach the sacral cover, reverse the
process.