p88 Leckey BeMe User Manual
SECTION 17.6:
ATTACHING AND
DETACHING BASIC
BACKREST COVER
To attach the basic backrest cover, slide the
top of the cover over the top of the backrest,
, and secure in place with the snap
fasteners
. There are openings , at either
side of the cover for harness connections.
Tuck the stretch fabric in between the foam
and the platework
, along both sides of
the backrest. Slide the bottom of the cover
underneath the bottom of the backrest and
secure in place with the snap fasteners
E
.
To detach the basic backrest cover, reverse
the process.
E
To Next Page
Loading...
