Leckey Squiggles Stander - Adjusting Chest and Hip Support Positions; Adjusting Lateral Support Width; Adjusting the Pelvic Harness Fit

Squiggles Stander - User Manual p23
11.3 ADJUSTING
THE CHEST AND HIP
SUPPORTS
To adjust the chest and hip support
rotate knob in a clockwise direction
and rotate knob in an anticlockwise
direction as shown. Set to the required
position and then retighten. The chest
support can only be adjusted in angle
and depth.
11.4 LATERAL SUPPORTS
Loosen the hand knob to adjust
the width of the lateral supports and
retighten when you have achieved the
desired position. If, the lateral supports
are attached with bolts instead of hand
knobs they can be adjusted with the
multi tool.
11.5 ADJUSTING THE
PELVIC HARNESS
To adjust the pelvic harness pull the
Velcro receiving straps around the user
until the desired position is achieved.
Always use caution to ensure
fingers do not become
trapped when adjusting the
chest and hip supports.
Always use caution to ensure
fingers do not become
trapped when adjusting the
lateral supports.