EasyManua.ls Logo

Leckey Squiggles Stander - Safety Warnings and Cautions; Critical Hazards: Toppling, Finger Traps, Occupant Security; Pinch Hazards and Daily Checks; Other Cautions: Trip Hazards, Cleaning Safety

Leckey Squiggles Stander
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Squiggles Stander - User Manual p5
SECTION 03:
WARNINGS AND CAUTIONS
1) WARNING TOPPLING HAZARD
Never use the product on a sloping
surface greater than 5 degrees.
Always check operation of linear
drives, gas struts, and motor drives
before use.
When adjusting the stander angle
ensure there is adequate access space
on all sides of the product.
Always lock casters facing outwards
before placing the user in the product.
2) WARNING FINGER TRAP HAZARD
Ensure that the user or carer does not
touch any moving joint or pivot that is
not locked.
While the user is in the product, the
carer should strive to keep product
adjustments to a minimum.
3) WARNING OCCUPANT SECURITY
User transfers in and out of
the product must be done with
appropriate equipment and personnel.
When transferring the user into the
product, rst use the pelvic band to
secure the user.
Ensure that all harnesses, sandal
straps and chest pad are securely
applied.
If the user exhibits any form of
distress, remove from the product as
quickly as is safely possible.
4) CAUTION FINGER PINCH HAZARD
While the user is in the product, the
carer should strive to keep product
adjustments to a minimum.
Take care when assembling or
adjusting the position of the stander
components that your ngers do
not get pinched when positioning
stander components and tightening
mountings.
During product assembly and
adjustment, the carer should avoid
nger pinching risk of the product’s
joints or pivots.
During transfers and adjustments, the
carer should avoid the nger pinching
risk of over-centre buckles and latches.
5) CAUTION DAILY CHECKS
The stander is to be checked daily
before use to ensure that all harnesses
and stander components are securely
attached.
Always check operation of linear
drives, gas struts, and motor drives
before use.
6) CAUTION TRIP HAZARD WITH
POWERED CHASSIS
Before moving a powered stander
ensure that battery charging
connection is removed.
7) CAUTION CLEANING
Clean the stander regularly to prevent
the build-up of dirt. Accumulated
dirt can prematurely wear the fabric
components and encourage corrosion
on the stander. Only use non-abrasive
household cleaners and moist cloths,

Related product manuals