EasyManua.ls Logo

Leckey Squiggles Stander - Training Requirements for Parents and Carers; General Safety Information and Precautions; Essential Safety Protocols Before Use; Securing the User and Ensuring Stability

Leckey Squiggles Stander
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Squiggles Stander - User Manual p7
Your Leckey product is a prescribed Class
1 Medical Device and as such Leckey
recommend that parents, teachers and
carers using the equipment should be
made aware of the following sections
of this user manual by a technically
competent person:
Section 7
Safety Information
Section 12
Frequent Adjustments for Daily use
Section 13
Cleaning and Care Information
Section 14
Daily Product Inspection
Leckey recommend that a written record
is maintained of all those who have
trained in the correct use of this product.
SECTION 06:
PRODUCT TRAINING
RECORD
(PARENTS, TEACHERS & CARERS)
SECTION 07:
SAFETY
INFORMATION
1. Always read instructions fully
before use.
2. Users should not be left
unattended at any time whilst
using Leckey equipment.
3. Only use Leckey approved
components with your product.
Never modify the product in any
way. Failure to follow instructions
may put the user or carer at risk and
will invalidate the warranty on the
product.
4. If in any doubt to the continued
safe use of your product or if any
parts should fail, please cease
using the product and contact our
customer care team or local dealer
as soon as possible.
5. Carry out all positional adjustments
and ensure that they are securely
fastened before you put the user
into this product. Some adjustments
may require the use of a tool which is
provided with each product. Keep all
tools out of reach of children.
6. When putting the user into the
stander both for positional and safety
reasons, always secure the pelvic and
chest support harnesses first.
7. When the product is stationary
ensure that all castors are locked
and facing away from the base as
this will improve product stability.

Related product manuals