Squiggles Stander - User Manual p31
12.5 ADJUSTING THE
HEIGHT OF THE TRAY
IN PRONE AND SUPINE
The height adjustment knobs for the tray
are located on either side of the central
spine. Rotate knob in a clockwise
direction and rotate knob in an anti-
clockwise direction, select the required
height and retighten.
12.6 ADJUSTING THE
DEPTH AND ANGLE OF
THE TRAY
Loosen the adjustment knob
on either
side, slide the tubes along the receiving
brackets to achieve the desired depth
and retighten the knobs. To adjust the
angle of the tray loosen the knobs on
either side of the tray, set the tray to the
required angle and retighten securely.
If the child is wearing sandals
or light footwear check the
straps to make sure the
webbing does not irritate the
skin.
To Next Page
Loading...
