EasyManua.ls Logo

Lectrosonics UCR100 - Specifications and Features

Lectrosonics UCR100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Compact Receiver
Rio Rancho, NM
9
Available frequencies: 537.6 to 608 MHz, 614 to 691.1 MHz
(Blocks 21 through 26)
Each unit operates on a single block.
Number of frequencies per block: 256 in 100 kHz steps
Channel spacing: 100 kHz
Frequency control: Crystal Controlled Phase Locked Loop
Sensitivity: 1 uv (20 dB SINAD)
Signal/Noise ratio: 105 dB (system)
Squelch quieting: 90 dB
AM rejection: 50 dB, 10 uv to 100 mv
Modulation acceptance: +/-20 kHz
Spurious rejection: Greater than 70 dB
Third order intercept: 0 dBm
Frequency response: 50 Hz to 18 kHz, (±2 db)
Distortion: 1% max at 50% modulation (system)
Audio output: 0 dBv (1 Vrms) UNBALANCED into 600 ohms
Antenna: 1/4 wave vertical (fixed)
Front panel controls: Single knob controls Audio Output Level
LED Indicators: Power (red), RF (green), Level (green),
Limit (red)
Battery Life: Single 9V Alkaline Battery for approximately
8 hours operation.
Power consumption: 60 ma.
Weight: 7.3 oz with battery
Size: 3.6 x 2.4 x 0.8 inches (housing only, belt clip and
knob extend beyond the housing.)
Specifications subject to change without notice.
Specifications and Features

Other manuals for Lectrosonics UCR100

Related product manuals