Lecureux TE-QC - PC Requests Storing of the Initialization Data in Flash Rom (110 D; 6 EH); PC Sends Direction of Rotation to the Screwdriver (111 D; 6 FH); PC Requests Data of Program no 1 (112 D; 70 H); PC Sends Data of Program no 1 (120 D; 78 H) to (127 D; 7 FH)

Operating manual TE-QC & TE-Light
LECUREUX SA 35
13.2.9 PC requests storing of the initialization data in Flash Rom (110D / 6EH)
16 | 6F | 01 | 6F
Answer of the screwdriver: receipt.
16 | 32 | 01 | 33
13.2.10 PC sends direction of rotation to the screwdriver (111D / 6FH)
16 | 6F | 02 | 01 | 72 switches the screwdriver on backwards
16 | 6F | 02 | 00 | 71 switches the screwdriver on forward.
Answer of the screwdriver: receipt.
16 | 32 | 01 | 33
13.2.11 PC requests data of program No 1 (112D / 70H)
16 | 70 | 01 | 71
Answer sees: 13.2.26.
Program data of and to the screwdriver
This is available for the program data No 2 – No 8 (113D / 71H) to (119D / 77H) too.
13.2.12 PC sends data of program No 1 (120D / 78H) to (127D / 7FH)
See 13.2.26,
Program data of and to the screwdriver
Answer of the screwdriver: receipt.
16 | 32 | 01 | 33
The same applies to program data No 2 - No 8
(121D / 78H) bis (127D / 7FH)
13.2.13 PC requests protection data (128D / 80H)
16 | 80 | 01 | 81
Answer of the screwdriver when menu 3 is locked (configuration of screwing torque) = 00000004
16 | 80 | 05 | 00 | 00 | 00 | 04 | 89
13.2.14 PC sends protection data (129D / 81H)
16 | 81 | 05 | 00 | 00 | 00 | 04 | 8A
Example value to lock menu 3 (configuration of screwing torque) = 00000004
Screwdriver’s reception receipt:
16 | 32 | 01 | 33
13.2.15 PC requests the value of the torque calibration (130D / 82H)
16 | 82 | 01 | 83
Answer of the screwdriver for a value of 5%:
16 | 82 | 03 | 05 | 00 | 8A
13.2.16 PC sends the desired value to use for torque calibration (131D / 83H)
16 | 83 | 03 | 05 | 00 | 8B
Example to set a value of 5%
Screwdriver’s reception receipt:
16 | 32 | 01 | 33