SPDIF coaxial digital output
This output provides a transformer isolated standard Sony/Philips digital interface. Use a good quality cable designed for
SPDIF applications. Audio cables must not be used as they will seriously degrade the data stream.
LIPS
The LIPS cables are directional and must be connected the right way round for the system to operate. No harm will be done if
cables are connected the wrong way round, the system will simply not work correctly. The black plug is inserted in to the
sending unit and the red plug in to the receiving unit. The chain will normally be:
Player (e.g. Stream) > Amplifier (e.g. Pulse) > Accessories
If a home automation controller is to be installed, the order would be:
Controller > Player > Amplifier > Accessories
This type of installation can be quite complex and is best performed by a Leema dealer.
In a basic system comprising two audio units, the LIPS cable will be arranged as follows:
Black (Stream) > Red (Pulse)
Connections
STREAM
13
To Next Page
Loading...