Front & Rear Panels
STREAM
9
Power Inlet & Switch
Ensure that the
voltage indicated is
correct for your area.
This will either be
230VAC or 115VAC.
‘LIPS’ bus connectors
These allow communication
between various Leema
system components.
Unbalanced Audio Outputs
Use phono leads to connect
these outputs to conventional
unbalanced amplifier
Inputs.
Rear PanelRear Panel
Front PanelFront Panel
DIGITAL Outputs
Use a dedicated digital phono
lead to connect this outputs to
a digital input.
NO USER SERVICEABLE PARTS INSIDE
REFER TO QUALIFIED SERVICE PERSONNEL
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
DO NOT USE IN DAMP CONDITIONS
THI S UNIT MUST BE EARTHED
CAUTI ON VORSI CHT
REMOVE POWER
BEFORE OPENING
VOR DEM ÖFFNE N
NETZSTECKER ZI EHEN
PRECI SI ON AUDIO COMPONENT MANUFACTURED I N THE UNITED KINGDOM BY LEEMA ELECTRO ACOUSTICS LIMITED
240 VAC 50/60Hz MAX 60W
COAX
LEFT
RIGHT
FUSE 240VAC:500mAT 120VAC:1AT
SERI AL No. :
WARNING
CLASS 1
LASER
PRODUCT
To Next Page
Loading...