leema-acoustics STREAM - Stream Specific LIPS Commands; Infra-Red Codes

Infra-red Codes
STREAM
16
STREAM specific LIPS commands
Header = 30 (General command)
Command values: 31 = STOP, 32 = PLAY, 33 = PAUSE, 34 = NEXT, 35 = PREV, 36 = Display ON, 37 = Display OFF
Header = 90 (Stream direct track access)
Command value: 1 - 99 representing track numbers 1 - 99. If the track value sent is not available on the current disc,
Stream will report an error on it’s display (Er) and go in to STOP mode.
Infra-red codes
The following codes may be used to program universal remotes:
IR DEVICE = 17 (Stream/Antila specific)
16 = LIPS INPUT INCREMENT, 21 = POWER TOGGLE, 22 = TRAY, 48 = PREV, 49 = NEXT, 50 = PLAY, 56 = STOP, 57 = PAUSE
59 = SCAN TOGGLE, 84 = DISPLAY TOGGLE
For direct track access (as per Sony CD1 format)
32 = num 0, 0 = num 1 ..... 8 = num 9, 39 = +10
The above are used as follows: num, +10, num. e.g. 1,+10,2 = track 12 etc.
In addition to Stream specific codes, the player is able to process amplifier codes for communication via LIPS:
IR DEVICE = 16 (Amplifier, e.g. Tucana etc.)
0 - 6 = INPUTS 1 - 7, 16 = INPUT UP, 17 = INPUT DOWN, 18 = VOLUME UP, 19 = VOLUME DOWN, 20 = MUTE TOGGLE
21 = POWER TOGGLE