Leftek M SERIES - Page 18

Note: All the network ptz camera support to call the number 35 preset
and execute the patrol of 1-8 preset afart March, 2015.E.x we only set
1.2.3 this three presets, call preset 35, then the ptz camera will cruising
among this presets. (Call preset 35 execute the patrol function correspond
the first patrol,default stay time 10m, speed 50. If you want to change
the stay time or patrol speed, please follow the above steps).
turn on patrol
Call preset 92, then call preset 1 (turn on patrol 1)
Call preset 92, then call preset 2 (turn on patrol 2)
Call preset 92, then call preset 3(turn on patrol 3)......and so on
11.5 Pattern setting and call
For example:If customer want to set pattern 1,then the steps as below:
Set preset 93,and then call preset 1( start to setting pattern 1)
Operate the ptz camera working according to the customers requirement
Set preset 93 and then call preset 5(save pattern 1)
Turn on pattern scan function operations:
call preset 93, and then call preset 1(turn on pattern 1)
call preset 93, and then call preset 2(turn on pattern 2)
call preset 93, and then call preset 3(turn on pattern 3)
call preset 93, and then call preset 4(turn on pattern 4)
11.6 AB line scan and call
Set line scan to A , call preset 94, call preset 41
Set line scan to B , call preset 94, call preset 42
Set AB line scan under high speed- call preset 94, call preset 43
Set AB line scan under medium speed- call preset 94, call preset 44
Set AB line scan under low speed-call preset 94, call preset 45
-17-