3
Step-1:
Draw positioning holes
Take out bracket from package box, place
the wall mount bracket on the wall and
mark down all 4 fixing holes
Installation Method
Step-2:
Drill holes and put expansion screws in.
Drill 4pcs expansion screw’s installation
holes at pre-marked position, then put
4pcs expansion screws in.
Note:
Please bring expansion screws own.
Wall Mount Bracket
Step-3:
Wall mount connect speed dome and
bracket.
Put the connection port of the speed
dome into bracket hole and put the
screw lock into corresponding
threaded holes.
-04-
To Next Page
Loading...