Touchsafe Pro Location Pendants are battery powered and communicate using a standard 169MHz
Telecare site-wide radio transmission and a short range infrared transmission. The Pendant will initiate a
call on the Nursecall system and display the users name along with its location to the nearest Touchsafe Pro
Call Point within infrared range. If the user is not within infrared range of a Call Point, then the Pendant call
along with the users name will still be displayed on the panel.
The call is cancelled by pressing the cancel button on the Touchsafe Pro Call Point that received the
Pendant Location call, or on the users bedside Call Point if no location was received.
The Location Pendant is designed to be worn around the neck; it includes a large orange call button and a
red reassurance LED which flashes when a call is made.
The Location Pendant is supplied with a 900mm long woven neck lanyard with an anti-ligature safety
closure. Should excessive force be applied the neck lanyard will part – it can be simply clipped back
together.
Touchsafe Pro Location Pendant keypads are embedded with an antimicrobial agent during manufacture.
This prevents the growth of harmful micro-organisms thereby preventing the spread of germs and disease.
Location Pendants can only be used with Touchsafe Pro panel software V4.00a and Touchsafe
Pro Call Point software V4.00a onwards.
To Next Page
Loading...