108
DMX
3
21. Setting up protection unit
21.1. Protection levels setup
21.2. Date/time setup
Protection levels setup is realized with navigator knob.
The setting of the MP2 and MP4 protection units can be managed through the MENU of the protection
unit or through the "power control station" software.
To correctly store data concerning possible faults, it’s strongly recommended set up date and time on
protection unit.
For more information about protection unit date and time setup, see related instruction sheet.
Date/time settings remain stored for approximately one week, in the absence of any type of feeding.
Protection
setting is
managed
with PSW
assigned to the
protection unit.
To Next Page
Loading...
