LEGRAND PREMIUS - UPS Default Data and Special Functions

22
EN
PREMIUS
1-10 kVA
O2
UPS battery numbers
P
UPS inner temperature
3.5.4 UPS Default Data and Special Function Execution
3.5.4.1. After the UPS completely starts up, press the key to change the LCD display to figure Q1.
Q1
Buzzer ‘on’
Q2
Buzzer ‘off’
3.5.4.2. Press the key to scroll through the UPS settings. The LCD will display in sequence figure Q1 (buzzer)
figure R1 (Self-test)
figure S1 (Bypass Voltage Windows)
figure T (Output Frequency Synchronization Window)
figure U (Inverter Output Voltage)
figure V1 (UPS Operation Mode)
figure W (Output Voltage Micro Tune Value)
figure X (UPS Id)
figure Y (Parallel function status)
figure Z (Battery cabinet/capacity setting)
INPUTLOAD
UPS
Battery
INPUTLOAD
UPS
0
C
Buzzer
Buzzer