LEGRAND PREMIUS - Communication Software; Hardware Setup; Software Installation

38
EN
PREMIUS
1-10 kVA
5.1. Hardware Setup
1. Connect the male connector of the USB cable to the UPS communication port.
2. Connect the female connector of the USB cable to a dedicated USB port of the attached computer.
3. For optional interface cards refer to Chapter 6 for installation.
5.2. Software Installation
For optimal computer system protection, install UPS monitoring software to fully configure UPS shutdown. You
may download the software in https://ups.legrand.com/en/software/software-download and install the monitoring
software.
5 Communication Software