5
1. Input socket
Connect your instrument here.
The Lehle Mono Volume processes signals
of electric and acoustic stringed instruments, as
guitars and basses, steel string and nylon string
acoustics and acoustic string instruments of all
kinds (violins with pickup systems). The input im-
pedance of the Lehle Mono Volume is approx. 2
MOhm. It does not matter whether the connected
signal has high or low impedance, or if it comes
from a passive or an active pickup system.
2. DIR Out
Connect your tuner or your amp here.
This output supplies the input signal with exactly
the same level. The DIR Out is buffered, which
means you can connect both high and low imped-
ance inputs to the DIR Out without influencing the
sound of the input signal. If you are using a tuner,
you can mute the VOL Out (for tuning) and the
DIR Out will provide a signal for the tuner.
3. Gain control
Use the gain control to adjust the level of the preamp
signal.
The gain control influences the maximum volume
of the Lehle Mono Volume. The gain control
knob consists of black anodized aluminium and is
recessed into the housing. It can be easily turned
by placing your fingertip in the top depression,
with the great advantage that, thanks to the
recessed design, the setting cannot be inadver-
tently disturbed on stage or during transportation.
With the gain control closed up to the stop (7:00
o’clock position) and the pedal in level position,
the signal is neither amplified nor attenuated, this
position is “unity gain“.
Turning this control to the right will increase the
signal by approx. 10 dB. The frequency range is
not influenced by this control.
To Next Page
Loading...
Need help?
General
