Leibinger Jet 3 - Remote Control Setup

Group 7 Data/Programming Page 132
Release R2.0 LEIBINGER JET3
7.3.1.5 Factory Settings
Under the tab <Factory settings> you can reset the printer adjustments to the
standard settings.
ATTENTION
The consequences of resetting to the factory settings should be
considered!
Figure 55
Reset device to factory settings
1 – Dialog box <Basic Settings>
5 – Button <Cancel>
2 –Tab <Factory Settings>
6 – Button <OK>
3 –Button <Reset>
7 – Message <Restart>
4 – Safety query <Continue>
8 – Button <OK>
4
2
1
3
6
5
7
8