Group 7 Data/Programming Page 145
Release R2.0 LEIBINGER JET3
Note: If no password has been entered for activated password query during the start
of the device, only the functions <Log on> in the menu „Extras“ are available
for the current user.
After logging-out the user, this function is still only available.
If you try to carry out a function in a logged-out status or you try to carry out
a function in a logged-in status for which the active level has no access
authorisation, accordant safety messages are faded-in.
The function is activated or deactivated as follows:
Press the button <Settings> (1) and the option <Password Activate> (2).
The function is activated or deactivated depending on the existing status.
Activate/deactivate password query
2 – Option <Password protection activated >
You will find further information regarding login/logout and switching
on the device in the chapter Login and in the chapter Switching on
with password protection!
To Next Page
Loading...
