Leibinger Jet 3 - Page 172

Group 7 Data/Programming Page 170
Release R2.0 LEIBINGER JET3
7.5 Extra (Additional functions)
With the button <Extra> in the main menu bar the submenu „Extra“ is displayed. The
following options are available:
 Test Print
 Direct Printstart
 Product Counter
 Login
 Interface Settings
 Editors
 Explorer
 Reload all Fonts
 Touch Calibration
 Database Settings
 Start Remote Screen
 Save Counters
7.5.1 Save counter states
For leaving a job, the counter status of integrated job counters are normally not
saved, that means for calling this job again, the counter states are 0 respectively set
to the predefined start values.
If the print should be continued with already existing counter states for calling the
job again, you have to activate the function <Save Counters>. If this function is
activated it is displayed by a  on the button of the function.
The function is activated or deactivated as following:
 Press the button <Extra> (1) and the option <Save Counters> (2).
 The function is activated or deactivated depending on the existing state.
Figure 81
Save counter states
1 – Button <Extra>
2 – Option <Save Counters>
1
2
Function activated