Leibinger Jet 3 - Product Counter Management; Product Counter Settings

Group 7 Data/Programming Page 171
Release R2.0 LEIBINGER JET3
7.5.2 Test print
With the option <Test Print> a defined default job with set internal PrintGo-source
is loaded.
This job can be used by the operator as basis to create a new job or to control the
print function of the JET3.
The default job is loaded as following:
Figure 82
Test print (Load default job)
1 – Button <Extra>
5 – Button <OK>
2 – Option <Test Print>
6 – Button <Cancel>
3 – Direct button (Icon)
7 – Execution report
4 – Message <Safety query>
8 – Button <OK>
1
2
3
7
or
loaded default job
8
4
5
6