Group 7 Data/Programming Page 172
Release R2.0 LEIBINGER JET3
If the test print is activated when a print start release did already
happen for the previous loaded job, the JET3 starts immediately
with the print process because all signals are generated internally
and no sensor or encoder are required.
Caution! Ink escapes immediately from the print head
Press the button <Extra> (1) and the option <Test Print> (2) or the accordant
direct buttons (Icon) (3).
A safety query (4), if the test print should be really started is faded in.
Confirm the loading of the job by pressing the button <OK> (5) or cancel the
process with the button <Cancel> (6).
A message (7), that the test print-job is loaded is faded in.
Confirm the message with the button <OK> (8). The job is now loaded and can
be started for printing.
To Next Page
Loading...
