Leibinger Jet 3 - Page 176

Group 7 Table of contents Page 174
Release R2.0 JET3
1. Reset counter (figure 84)
 Press the button <Reset> (4) to reset the counter or cancel the process with
the button <Cancel> (6).
 If there are 2 product counters defined each of them has to be reset separately.
Note: The resetting happens without a further safety query.
 The value „0“ is now displayed in the status field <Production Counter> of
the main dialog box.
Figure 84
Product Counter Settings - Reset
Select Product Counter Settings / 1 or 2 product counters
Settings for 1 product counter
Settings for 2 product counters
Reset one product counter
Reset two product counters
To reset the product counter push the
<Reset> button. The dialog box will
close and the product counter is set to 0.
Each product counter has to be reset
separately. Pushing the <Reset> button
will close the dialog box and set the
respective product counter to 0.
Results
1 – Dialog box <Product Counter>
4 – Button <Reset>
2 – Option <Product Counter Settings>
5 – Button <Set>
3 – Option <2. Product Counter> with indicator
6 – Button <Cancel>
Status field
Status field
4
4
1
3
2
1
3
2
5
6