Group 7 Table of contents Page 175
Release R2.0 JET3
2. Change counter value (figure 85)
Change the value of the counter with the arrow keys (7). The value of the
counter is increased or reduced in single steps by pressing the accordant
buttons.
Or
Click in the Counter display field (4). The Numeric keypad (8) opens for input.
If there are 2 product counters defined each of them has to be set separately.
The product counter dialog box has to be re-opened for that procedure.
You will find further information regarding the working with Numeric
keypads in the chapter Numeric keypad!
Confirm the value change by pressing the button <Set> (5) or cancel the
process with the button <Cancel> (6).
The set value is now displayed in the status field <Production Counter> of
the main menu.
This procedure has to be carried out for each product counter separately. The
dialog box has to be re-opened to set the second product counter.
If job counters (object counters) whose settings <Counter reset>
are applied with the attribute „production counter“ exist in the
current job, they will be also reset. The attribute “production
counter” for <Counter reset> is only available for the 1. product
counter.
You will find further information regarding the counter reset methods
in the chapter Counter reset (methods)!
To Next Page
Loading...
