Leibinger Jet 3 - Page 181

Group 7 Data/Programming Page 179
Release R2.0 LEIBINGER JET3
7.5.3.3 Reset all job counters
With this function, all existing job counters in the current loaded job can be reset.
Proceeding:
 Press the option <Reset all Job Counters> (2).
 A safety query (3), if all job counters have been reset is faded in.
 Confirm the reset by pressing the button <OK> (4) or cancel the process with
the button <Cancel> (5).
 All job counters are reset.
Figure 87
Product counter (Job counter reset)
1 – Dialog box <Product Counter>
4 – Button <OK>
2 – Option <Reset all Job Counters>
5 – Button <Cancel>
3 – Message <Safety query>
ATTENTION
The reset of the job counter is irrevocably!
3
4
1
2
5
Example: job counter
Main menu: