Leibinger Jet 3 - Job Editor Management Functions; Saving Jobs and Saving As

Group 8 Job editor Page 222
Release R2.0 LEIBINGER JET3
Open a dialog box and enter settings
(Example: Enter settings within the tab „PrintGo Parameter“)
Proceeding:
 Open the drop-down menu <Settings> (1) and select <Print Parameter> (2)
 This opens the <Job Settings> dialog box (3).
 The dialog box <Job Settings> has a tab with 4 tabs (4). Respectively the
parameter settings are separated in 4 groups: <Print style>, <PrintGo
Parameter>, <Encoder Parameter>, <Date change parameter>. A tab is
selected by pressing the caption (5). In this example the <PrintGo Parameter>
tab is selected.
 Options are activated using checkboxes (6).
 Parameters are entered into display fields (8). Inputs or changes can either be
made by using the arrow keys (7) or a numeric keypad (9).
INFORMATION
The chapter Numeric keypad describes further details regarding this
input method.
 Pressing the <Cancel> button (10) discards all changes and closes the dialog
box.
 Pressing the <OK> button (11) confirms and saves all settings and changes and
closes the dialog box.
INFORMATION
The chapter Parameter settings describes further details about the
content of all tabs of the <Job Settings> dialog box.