Group 8 Job editor Page 286
Release R2.0 LEIBINGER JET3
F2897 is code that shows the current
Julian date and the last 2 digits of the
current year as a 3 digit alphanumerical
expression.
Displayed as “f” in the display field.
The <F2897> function is a special date-coding
for US pipe manufacturers. It is a specific US-
guideline to convert the 5 digit date code
containing the “Julian date” and the last two
digits of the year to a just 3 digits long calculated
alphanumerical number.
The 19
th
February is the 50
th
day of the
year 2014.
Displayed as “j” in the display field.
The <Julian> function shows the day-of-year
number for the current date.
How to set ab expiry date
The expiry date is created by an offset on the current date/time. It is possible to
choose either days or months for the offset.
Expiry date – calculated on the basis of days
If the expiry date is calculated in days the result will show the current day or/and
time plus the offset. The function will consider the actual number of days of the
current month as well as leap years.
Expiry date – calculated on the basis of months
If months are used for the calculation of the expiry date, the following rules are valid:
If the specific day code does not exist in the month which would be the “expiry
month”, the expiry date will be shifted into the next month. The number of days the
expiry date would be shifted depends on the “missing” days in the month in which
the expiry date originally would have been. Please see the examples for details.
Example 1:
The day of the production is: 31 August 2012
The expiry date shell be: 6 months
The regular result of the final date would be: 31. February 2013. Due to the fact that
this day not exists, the printer will print: 03. March 2013. In that case 3 days are
missing in February.
To Next Page
Loading...
