Group 10 Equipping/Maintenance Page 341
Release R2.0 LEIBINGER JET3
10. Equipping/Maintenance
Danger of explosion!
Before filling the device with the consumables, measures for the
electrostatic discharge have to be made!
The operator can carry out a discharge either by the direct touching of the
LJ3-cabinet or by standing with the appropriate ESD-shoes on an grounded
surface!
Dangerous material in the machine!
Danger of serious damage through burns, skin irriation and poisoning!
Protective equipment is necessary! Read the safety data sheets and the
personal protective equipment rules and regulations!
10.1.1 Refilling of ink and solvent
The storage containers for ink and solvent are installed beneath the cover flap of the
refill unit (see illustration below).
The two reservoir tanks are monitored by level sensors. They are always
unpressurized and can be opened in every device condition – also during the
production.
The reservoir tanks and the sealing cap are color-coded and labelled to avoid any
mistakes in filling. Additionally the sealing caps are marked with the ink-no. or
solvent-no. which are admissible for the device.
To Next Page
Loading...
