EasyManua.ls Logo

Leibinger Jet 3 - Cleaning Procedures; Print Head Cleaning Process

Leibinger Jet 3
378 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Group 10 Equipping/Maintenance Page 346
Release R2.0 LEIBINGER JET3
10.2.4 Other servicing work
10.2.4.1 Replacement of the battery
DANGER
Dangerous voltage!
Contact causes serious damage through an electric shock! Disconnect
the device from the mains supply prior to opening. Remove mains plug!
CAUTION RISK OF EXPLOSION
Risk of explosion in the event of incorrect replacement of the battery.
Replace only with an identical battery or with an equal value battery
type in accordance with the recommendations of the manufacturer!
The instructions of the battery manufacturer must be observed when
disposing of the battery!
REPLACEMENT OF BATTERY
This work must only be carried out by trained personnel or by Leibinger
service technicians!
The battery is situated in the electronics housing on the controller board. If necessary
the battery must be replaced. For the change of the battery you have to observe the
following safety- and disposal instructions as well as the disposal directions and the
disposal directions of the battery manufacturer!

Related product manuals