Group 7 Data/Programming Page 90
Release R2.0 LEIBINGER JET3
7. Data entry/Programming
Data which should be printed by the LEIBINGER JET3 can be entered, called, changed
and saved with several input devices, e.g. TFT-Touch display, mouse etc..
The printer can also be programed and controlled with the (RS232/Ethernet) per external
software (according to the Leibinger interface protocol for the LJ3).
Further more the LEIBINGER JET3 can also carry out several functions (e.g. job selection)
by the control with digital signals (e.g. out of a SPS) and can be therefore also controlled
locally.
In the following the operation and programming with the TFT-Touch display are described.
To Next Page
Loading...
