Leica DMI3000B - Page 46

46
6. Assembly
6.11 Installing the lamp housing mount and
mirror housing (Leica DMI4000B and
DMI6000B)
Place lamp housing mount (Fig. 53) or mirror
housing on rear wall. Mount from front with
socket head screws.
Fig. 54 Lamp housing 106z
1 Collector adjustment
2 Vertical lamp adjustment
3 Horizontal lamp adjustment
4 Adapter ring
Fig. 53 Lamp housing mount
1
2 2
Fig. 52 Rear view, Leica DMI4000 B and DMI6000B
1 Installation point for lamp housing mount
or mirror housing
2 Holes for lamp housing mount or mirror housing screws
3
1
2
4
Fig. 51
Inserting
lamp with
cover
a right
b wrong
b
a
Next, attach the appropriate connector(s) (right,
left, straight) to the lamp housing mount. The
lamp housing or coupling is then mounted on the
connector, which is also held by four screws.