Leica SPRINTER 200M User Manual

LEICA SPRINTER Quick Guide English
Instrument Components
a) Horizontal fine motion screw
b) Battery compartment
c) Circular level
d) Gunsight
e) Focusing knob
f) Handle
g) Eyepiece
h) LCD display
i) Base plate
j) Levelling footscrew
Operating Keys and Functions
*) when in Menu mode
a
j
i
h
g
f
e
d
b
c
Sprinter_01
Key Symbol 1
st
level funct. 2
nd
level funct.
On/Off Power On/Off
switch
NONE
MEAS Measuring
trigger key for
measuring
height and
distance
2nd function
(Continuous meas-
urement) with
prolong key press of
2 seconds
Height
/ Dist.
Alternating bet-
ween Height and
Distance display
Cursor up *
dH Height Differ-
ence measure-
ment and RL
computation
Cursor down *
MENU Activation and
selection of
settings
ENTER key for
confirmation
purpose *
Back-
light
LCD backlight
illumination
ESC key for termi-
nation of program or
setting *

Leica SPRINTER 200M Specifications

General

Brand	Leica
Model	SPRINTER 200M
Category	Measuring Instruments
Language	English

Summary

Instrument Components and Operation

Instrument Components Overview

Identifies physical parts of the Leica Sprinter instrument, including screws, battery, level, and display.

Operating Keys and Functions

Details the functions of various keys like On/Off, MEAS, Height/Dist, dH, MENU, and Backlight/ESC.

Measurement Modes and Icons

Measurement Modes

Lists available measurement modes: Measurement, MENU selection, Adjustment, and Tracking.

Instrument Icons

Explains icons for LCD backlight, staff measuring modes, contrast levels, battery status, and memory.

Measurement Procedures

Height and Distance Measurement

Describes the process of switching on, aiming, and triggering measurements for height and distance.

Reduced Level and Height Difference

Details steps for height difference and reduced level functions, including inputting reference levels.

Menu Settings Configuration

Input and Data Management

Covers settings for Point ID, Reduced Level input, and managing recorded data via the Data Manager.

Measurement and Display Settings

Includes settings for Adjustment, Inverse Staff, LCD Contrast, Units, AutoOFF, and Rounding precision.

System and Communication Settings

Details Beep settings for key presses and RS232 communication parameters like Baudrate and Parity.